Reference: OLEJKOMPRESOR_0,5-L
Synthetic triester based compressor oil suitable for use in reciprocating compressors. The oil has an extremely high auto-ignition temperature of +420 °C.
Reference: ACTIVECOALSILEXTRA_0,5-L-0,25-KG
Refill the filter according to service manual.
Reference: SILICAGELSGB2_0,5-L
Refill the filter according to service manual.
Reference: SITOMIKRO_0,5-L-0,45-KG
Micromolecular sieve - for filtration of moisture during filling of cylinders with air by high pressure compressor.
Reference: MISTRALM6
The MISTRAL high pressure compressor, driven by an electric motor at 220 or 380 V, provides 103 l/min at a maximum pressure of 330 bar.
The TYPHOON OPEN13ES high pressure compressor, driven by a 380 V electric motor, provides 250 l/min at a maximum pressure of 350 bar.
This high quality professional high pressure compressor is designed for continuous heavy duty commercial operation by divers, firefighters or airmen. Thanks to its low speed of 930 rpm, it is able to work continuously all day without getting too "out of breath". This also makes the compressor significantly less noisy, with minimal vibration and an extended service life.
The Typhoon compressor is also equipped with manual defrost for added safety and comfort of use. It also features overheating protection and an automatic shut-off via a pressure switch.
The compressor is supplied with a three-phase 5.5 kW 380 V motor.
"Excellent air quality thanks to unique filtration system"
It is equipped with an intermediate stage separator, suction micro filter, BA pre-filter with 80/535 mm diameter ( 0.5 mg/m3 residual oil) and a twin two-phase drain filter with activated carbon cartridge (removes oil residues and odour) and micromolecular screen (removes moisture).
Air quality meets and exceeds all prescribed EN12021:2014 standards.
The compressor is portable, three stage, air cooled, oil lubricated.
The compressor controls are powered by 24 V (second electrical circuit) for added safety and the ability to connect automated low voltage elements (nitrox/trimix mixers, air dryers, etc.).
According to the customer's request, we can set the safety valve to 200 or 300 bar and equip the corresponding filling end.
We also offer other options such as auto start, switching valve for 200 and 300 bar filling, filling adapter with safety valve for 200 bar, filling hose with simultaneous filling of 200 and 300 bar, more powerful skimming filter for extremely humid environments, extended service life and lower operating costs, sensor for oil level control and more.
Other specifications of the TYPHOON OPEN13ES compressor :
Data sheet
Reference: SILICAGELSGB2_0,5-L
Brand: CZECH MADE
Refill the filter according to service manual.
Reference: EKO200
Brand: CZECH MADE
Compressor for high comfort and low noise level (72 dB).
Reference: KING
Brand: LMNT
Reliable continuous mixing plant "mixer" for the production of Nitrox and Trimix mixtures in professional design.
Reference: CYCLONE30E
Brand: PARAMINA
CYCLONE, Silent Force. Four-stage, air-cooled, high-pressure reciprocating compressor.
Reference: FILLINGPANEL
Brand: PARAMINA
This kit is ready to connect a 300 bar pressure cylinder with a classic diving valve (G 5/8) and you can immediately start filling your paintball guns.
Reference: SITOMIKRO_0,5-L-0,45-KG
Brand: CZECH MADE
Micromolecular sieve - for filtration of moisture during filling of cylinders with air by high pressure compressor.
Reference: MISTRALM8BZ
Brand: PARAMINA
The MISTRAL M8 high pressure compressor, driven by a HONDA petrol engine, provides 140 l/min at a max. pressure of 330 bar.
Reference: EKO400
Brand: CZECH MADE
Compressor for high comfort and low noise level (62 dB).
Reference: CYCLONE24E
Brand: PARAMINA
CYCLONE, Silent Force. Four-stage, air-cooled, high-pressure reciprocating compressor.
Reference: OLEJKOMPRESOR_0,5-L
Brand: LIQUI MOLY
Synthetic triester based compressor oil suitable for use in reciprocating compressors. The oil has an extremely high auto-ignition temperature of +420 °C.
