- There are no more items in your cart
- Shipping
- Total Kč0
Reference: ZV200
Brand: LOLA
Plug 200 bar with a vent screw
Plug 200 bar with a vent screw, Lola
In stock
Reference: ZV300
Brand: LOLA
Plug 300 bar with a vent screw
Plug 300 bar with a vent screw, Lola
In stock
Reference: TANKHANDLE
Brand: NORTHERN DIVER
Tank holder
Holder for 10, 12 and 15 litre bottles, light, strong, ergonomically shaped handle.
In stock
Reference: TANKBOOT5
Brand: Eurocylinder
Bottle shoe for tanks with a diameter of 140 mm
Plastic boot to protect the bottom of the tank. This allows the tank to be set up
In stock
Nuvair Oxygen Sensor Replacement 9507M
The Nuvair 9507M replacement oxygen sensor is for use with the Nuvair Pro O2 Alarm (both handheld and panel mount models) oxygen analyzer and Nuvair Pro Trimix gas analyzer.
Description
The Nuvair 9507M is a replacement electrochemical oxygen sensor for gas analyzers. The 9507M replacement sensor fits the following analyzers:
- Nuvair Pro O2Alarm - Handheld
- Nuvair Pro O2Alarm - Panel Mount
- Nuvair Pro Trimix, sold after 05/2013
PLEASE NOTE: Never expose gas sensors to pressure or you may cause damage and/or false readings. Damaged sensors will not provide accurate gas analysis. Inaccurate gas analysis can lead to serious personal injury or death. Most gas analyzers can be used to analyze a regulated gas sample flow, the contents of a gas cylinder, or the flow from a regulator. The flow rate of gas must equal 1-5 L/min. To produce this flow, aFlow Restrictor and Regulatormay be required.
Specifications
Output 8-13 mV in air at 25°C/77°F, sea level Electrical Connector Mating plug: Molex (PN 22-01-3037 or 22-01-2037) Range 0-100% oxygen (max), 0-1% oxygen (min) Accuracy ±1% of full scale at constant temperature and pressure (0-1 atm) when calibrated with 100% oxygen Sensor Type Electrochemical Expected Sensor Life 12 Months – 100% Parts and Labor13-18 Months – 50% Sensor Only19 – 24 Months – 25% Sensor Only Response Time <6 seconds for 90% of final value Operating Temperature 32-104°F (0-40°C) Storage Temperature 32-122°F (0-50°C) Humidity 0-99% rh (non-condensing) Weight 1.2 oz (32 g) Application For surface/above-water diving cylinder verification applications; not intended for underwater use.Product Details
9507M
Data sheet
- Type of instrument
- Gas analysers
- Weight
- 0.2kg
10 other products in the same category:
Reference: PICO
Brand: NRC
PIC O2 Analyzer
The NRC PIC O2 Analyzer is a small and portable oxygen concentration measuring instrument.
In stock
Reference: APD14
Brand: ITG
O2 oxygen sensor Typ AP14 for Buddy Inspiration
O2 oxygen sensor Typ AP14 for Buddy Inspiration.
In stock
Reference: D02
Brand: ITG
O2 Sensor Type D-02 for Dräger Oxygauge
O2 Sensor Type D-02 for Dräger Oxygauge with single cathode/R-15.d Vandergraph.
In stock
Reference: D40
Brand: ITG
Oxygen sensor for Analox O2 EII Analyzer
The NRC O2 sensor type D-40. The exchange sensor for Analox O2 EII Analyzer.
In stock
Reference: NUVAIRPRO
Brand: NUVAIR
Nuvair Pro O2 Handheld Analyzer 9 V
The Nuvair Pro O2 Handheld Analyzer measures oxygen levels in mixed gases from 1% to 100% oxygen. It comes with a water- and impact-resistant case and is available in three power options: Wall plug-in, 9-volt or rechargeable lithium battery.
In stock
Reference: D05R
Brand: ITG
Oxygen sensor for CCR, D-05 R
Oxygen sensor with MOLEX connection suitable for CCR and analyzers
In stock
Reference: ZIPPRO
Brand: NUVAIR
DE-OX ZIP PRO oxygen analyzer
The ZIP oxygen analyzer is used to measure the oxygen content of gases such as Nitrox, Heliox and Trimix.
In stock
Reference: GENIUSN
Brand: LMNT
GENIUS nitrox mixer
Reliable continuous mixing plant "mixer" for the production of Nitrox mixtures up to 40 % O2.
In stock
Reference: ZIPDEOX
Brand: NUVAIR
Oxygen Analyzer DE-OX ZIP
The ZIP oxygen analyser is used to measure the oxygen content of gases such as Nitrox, Heliox and Trimix. The measurement is digital and is made on the basis of a previous calibration of the instrument. The value is displayed as a percentage with resolution to tenths.
In stock
Reference: KING
Brand: LMNT
KING mixer for Nitrox/Trimix
Reliable continuous mixing plant "mixer" for the production of Nitrox and Trimix mixtures in professional design.
In stock
The Nuvair 9507M replacement oxygen sensor is for use with the Nuvair Pro O2 Alarm (both handheld and panel mount models) oxygen analyzer and Nuvair Pro Trimix gas analyzer.