Reference: XTX40OCT
Brand: Apeks
The second stage XTX40 version octopus is ideal for diving in cold water (less than 10 ° C). Octopus XTX40 from the classical second-degree XTX40 yellow/black different color finishes. Part of the octopus is yellow medium pressure (90 cm, 3/8 "UNF).
Reference: XTX50IIST
Brand: Apeks
The second stage is equipped with XTX50 RVS (duplex venturi system), DCE (removable louvers deflectors), CRC (stepless inspiratory resistance using bolt) and heat exchanger. It is suitable for diving in cold water (less than 10 ° C.
Reference: XTX40IIST
Brand: Apeks
The second stage is equipped with XTX40 RVS (duplex venturi system), DCE (removable louvers deflectors) and heat exchanger.
Reference: CYKLON2ST
Brand: POSEIDON
Allows diving in the most demanding conditions, very adaptable breathing.
The ZIP PRO oxygen analyzer is used to measure the oxygen content of gases such as Nitrox, Heliox and Trimix. The measurement is digital and is performed on the basis of a previous calibration of the instrument. The value is displayed as a percentage with resolution to tenths.
DE-OX ZIP PRO is a compact, lightweight and portable instrument for the analysis of oxygen in air mixtures.
The oxygen sensor is integrated into the body of the analyzer as well as the 9V battery and measuring electronics.
The analyzer can be used not only to check the resulting mixture, but also to continuously monitor the compressor output mixture, where it is able to visually and audibly warn of a lower or higher oxygen content in the mixture, or even, for example, to switch off the compressor.
Basic features of the ZIP PRO oxygen analyzer:
ZIP PRO oxygen analyzer specifications:
Data sheet
Specific References
Reference: D02
Brand: ITG
Reference: D05R
Brand: ITG
Reference: PICO
Brand: NRC
Reference: D40
Brand: ITG
Reference: GENIUSN
Brand: LMNT
Reference: 9507M
Brand: NUVAIR
Reference: M03
Brand: ITG
Reference: KING
Brand: LMNT
check_circle
check_circle
