Reference: DST4XTX
Brand: Apeks
Regulator APEKS 1.st DST4 - DIN (XTX)
Dry Sealed System with swivel turret (DST)
In stock
- There are no more items in your cart
- Shipping
- Total Kč0
Reference: ARGONSTAGE_VNEJSI-SROUBENI
Regulator 1st stage for ARGON
Regulator 1st stage for ARGON
In stock
Reference: DIANA
Regulator DIANA 1st stage
Unbalanced piston first stage, easy to use - 1 high pressure and 4 low pressure outlets
In stock
Reference: M1DIN1ST
Regulator ATOMIC M1 DIN 1.st
With its extremely wide power spectrum, the M1 is suitable for the most demanding diving conditions imaginable
In stock
Description
The first stage DST4 is balanced, equipped with a DS (Dry Sealed) - closure of first stage by outer membrane. Unique over-balanced, diaphragm design - as the diver descends, the over-balancing feature allows the medium pressure gas in the hose to increase at a rate faster than ambient. This results in superior performance at depth.
2 HP ports and 4 MP ports on a rotating turret are angled for optimum hose routing.
An environmental dry system keeps water out of the main spring chamber thus preventing ice buildup and keeping silt and contamination out.
Product Details
DST4XTX
Data sheet
- Cold water
- ano
- Type 1.degree
- Membrane
- Balanced
- ano
- Number of HP outputs
- 1
- Number of LP outputs
- 4
- Travel version
- ne
- 1st stage connection
- DIN
- Operating pressure
- 300 bar
- LP output in the axis
- ne
- Regulation of inspiratory resistance
- ne
- Weight
- 0.5kg
Specific References
- EAN13
- 5055538800245
You might also like
Reference: XTX50IIST
Brand: Apeks
Regulator APEKS 50 XTX second stage
The second stage is equipped with XTX50 RVS (duplex venturi system), DCE (removable louvers deflectors), CRC (stepless inspiratory resistance using bolt) and heat exchanger. It is suitable for diving in cold water (less than 10 ° C.
In stock
Reference: ORINGSETDM
Brand: Divemarine
O-ring set 4x10pcs
Practical box. Set of O-rings, 4 sizes of 10 each.
In stock
Reference: ZAKETHADICEFLEX_100-CM
Brand: DIVERS DIRECT
LP Inflator Hose Proflex, Divers Direct
Flexible, medium pressure hose for inflator or dry suit with double outer braid, optionally in lengths of 0.20 - 1.00 m.
In stock
Reference: VAZELINADM
Brand: Divemarine
Silicone grease 25g
Silicon grease from Divemarine is an excellent agent for lubricating and preserving your equipment.
In stock
Reference: VENTILAPRV
Brand: Apeks
Relief valve APRV, Apeks
Adjustable safety valve for 1st stage of regulators. Suitable for argon bottle to dry suits.
In stock
Reference: MAN360_SEDA-KLASICKA-HADICE
Brand: Apeks
Pressure gauge APEKS 360 Bar
A new, light-weight gauge Apeks has luminescent dial with bold, easy to read digits.
In stock
10 other products in the same category:
In stock
Reference: FSRXTX200DIN
Brand: Apeks
Regulator APEKS 1.st FSR - DIN (XTX200)
Second best from Apeks. Suitable for cold water
In stock
Reference: GIOVE_DIN-BLACK-ICE
Brand: SOPRASSUB
Regulator GIOVE 1st stage
Balanced diaphragm first stage, easy to use - 2 high pressure and 5 low pressure outlets.
In stock
Reference: FSRXTX200DIN5
Brand: Apeks
Regulator APEKS 1.st FSR - DIN 5 MP (XTX200)
Second best from Apeks. Suitable for cold water
In stock
Reference: MINERVA_DIN
Brand: SOPRASSUB
Regulator MINERVA 1st stage
Balanced piston first stage, simple to use - 2 high pressure and 5 low pressure outlets
In stock
Reference: FSR5TUNGSTEN
Brand: Apeks
Regulator 1.st FSR5 TUNGSTEN
It features a sophisticated design tuned for best performance.
In stock
Reference: XSTREAMDURATIONG58
Brand: POSEIDON
Regulator XSTREAM DURATION G5/8" 1st stage
Approved for gas mixtures up to 99.95% O2 and usable for diving with Trimix, Nitrox or as a deco regulator.
In stock
Reference: MTXRDIN
Brand: Apeks
Regulator APEKS 1.st MTX-R - DIN
MTX-R is based on the MTX - developed by United States Navy for extreme conditions
In stock
Reference: ARGONSTAGE_VNEJSI-SROUBENI
Brand: BtS
Regulator 1st stage for ARGON
Regulator 1st stage for ARGON
In stock
Reference: ST1DIN1ST
Brand: Atomic Aquatics
Regulator ATOMIC ST1 DIN 1.st
The first stage is carefully made by chip machining from special type 316 stainless steel, which is twice as strong as brass and is close to titanium in its corrosion resistance.
In stock
Customers who bought this product also bought:
Reference: REPAIRKITDM
Brand: Divemarine
Dry and wet suit repair kit
Set for repairing dry and wet suits
In stock
Viewed products
Reference: SUPERCHANNELBUNGEE_MODRA-SMALL
Brand: MARES
Avanti Superchannel OH
The Avanti Superchannel OH is the latest evolution in Channel Thrust Technology, designed for the diver who wants the perfect blend of power and efficiency in one fin. Minimized leg fatigue!
In stock
Dry Sealed System with swivel turret (DST)