Reference: BUNGEEBAR_3-MM-MODRA
Gumicuk aka Bungee
Handy quality bungee cord suitable for various diving harnesses.
In stock
- There are no more items in your cart
- Shipping
- Total Kč0
Reference: ORINGSETDM
O-ring set 4x10pcs
Practical box. Set of O-rings, 4 sizes of 10 each.
In stock
Reference: HADICEREGULNEW_CERVENA-15
Medium pressure hose for DIVEFLEX regulator
DIVEFLEX medium pressure hose to controller/automation.In black, blue,green, red,yellow and pink.
In stock
Regulator APEKS 1.st TEK3 - DIN
The first stage Apeks TEK3 was designed for technical divers.
Description
APEKS TEK3
The first stage from Apeks, TEK3 has been designed for technical divers to best suit their specific needs.
TEK3 is based on the proven construction of Apeks membrane sealed first stages. It is designed specifically for a dual cylinder configuration - double-mount - to meet specific hose routing requirements from the first stages.
The TEK3 has three medium pressure 3/8 "UNF ports and one high pressure 7/16" UNF port. All ports are located flush so that the hoses connected to them extend from the first stage in one direction.
TEK3 is available in two versions - left and right. The first stages are connected to the valves by outer diaphragms facing each other, allowing maximum access to the valves.
NITROX TEK3 will also be available with both DIN and M26 DIN standards.
Of course there is a DS (Dry Sealed) system known from closed first stages of Apeks.
The weight of one TEK3 first stage is 0.7kg.
Characteristics:
- 3x3 / 8 “UNF ports
- 1x7 / 16 “UNF port
- DS - closing of the first stage by a dry chamber
- membrane balanced
- material: chrome-plated brass
- medium pressure: 9.5bar +/- 0.5bar
- Maximum working pressure: 300bar
Product Details
TEK3_LEVY
Data sheet
- Cold water
- ano
- Type 1.degree
- Membrane
- Balanced
- ano
- Number of HP outputs
- 1
- Number of LP outputs
- 3
- Travel version
- ne
- 1st stage connection
- DIN
- Operating pressure
- 300 bar
- LP output in the axis
- ne
- Regulation of inspiratory resistance
- ne
- Weight
- 0.6kg
Specific References
- EAN13
- 5055538802027
You might also like
Reference: HPHADICE_20-CM
Brand: DIVERS DIRECT
HP High Pressure Standard Hose, Divers Direct
Flexible, Kevlar-reinforced rubber high-pressure hose for manometer, optionally in lengths of 0.15 - 1.20 m.
In stock
Reference: XTX50IIST
Brand: Apeks
Regulator APEKS 50 XTX second stage
The second stage is equipped with XTX50 RVS (duplex venturi system), DCE (removable louvers deflectors), CRC (stepless inspiratory resistance using bolt) and heat exchanger. It is suitable for diving in cold water (less than 10 ° C.
In stock
Reference: ORINGSETDM
Brand: Divemarine
O-ring set 4x10pcs
Practical box. Set of O-rings, 4 sizes of 10 each.
In stock
Reference: ZAKETHADICEFLEX_100-CM
Brand: DIVERS DIRECT
LP Inflator Hose Proflex, Divers Direct
Flexible, medium pressure hose for inflator or dry suit with double outer braid, optionally in lengths of 0.20 - 1.00 m.
In stock
In stock
Reference: TEKMANOMETR
Brand: SOPRASSUB
SPG gaugeTEK 300 Bar, Sopras sub
Metal SPG in a plastic cover 300 bars
In stock
Reference: XTX40IIST
Brand: Apeks
Regulator APEKS 40 XTX second stage
The second stage is equipped with XTX40 RVS (duplex venturi system), DCE (removable louvers deflectors) and heat exchanger.
In stock
In stock
Reference: ZAKETHADICE_50-CM
Brand: DIVERS DIRECT
LP inflator hose standard, Divers Direct
Medium pressure hose for inflator or dry suit, optionally in lengths of 0.20 - 0.80 m.
In stock
Reference: VAZELINADM
Brand: Divemarine
Silicone grease 25g
Silicon grease from Divemarine is an excellent agent for lubricating and preserving your equipment.
In stock
Reference: LPHADICE_110-CM
Brand: DIVERS DIRECT
Hose LP medium pressure hose standard
Medium pressure hose to connect stage I and stage II automation, optionally in lengths of 0.50 - 2.10 m, black.
In stock
10 other products in the same category:
Reference: DST5
Brand: Apeks
Regulator APEKS 1.st DST5 - DIN (XTX)
Same as DST4 with one extra axial MP port
In stock
Reference: FSRXTX200DIN
Brand: Apeks
Regulator APEKS 1.st FSR - DIN (XTX200)
Second best from Apeks. Suitable for cold water
In stock
Reference: FSRXTX200DIN5
Brand: Apeks
Regulator APEKS 1.st FSR - DIN 5 MP (XTX200)
Second best from Apeks. Suitable for cold water
In stock
Reference: JETSTREAM1ST
Brand: POSEIDON
Regulator JETSTREAM 1st stage
Poseidon's legendary Jetstream first stage features a robust design, high flow rate and long life.
In stock
Reference: ARGONSTAGE_VNEJSI-SROUBENI
Brand: BtS
Regulator 1st stage for ARGON
Regulator 1st stage for ARGON
In stock
In stock
Reference: DS4NITROX
Brand: Apeks
Regulator 1st stage Apeks DS4 Nitrox
The cornerstone of many divers' breathing apparatus worldwide.
In stock
Reference: M1DIN1ST
Brand: Atomic Aquatics
Regulator ATOMIC M1 DIN 1.st
With its extremely wide power spectrum, the M1 is suitable for the most demanding diving conditions imaginable
In stock
Reference: Z2DIN1ST
Brand: Atomic Aquatics
Regulator ATOMIC Z2 DIN 1.st
Our most compact and economical regulator system. The Z1 is the most affordable controller in the Atomic range.
In stock
Reference: GIOVE_DIN-BLACK-ICE
Brand: SOPRASSUB
Regulator GIOVE 1st stage
Balanced diaphragm first stage, easy to use - 2 high pressure and 5 low pressure outlets.
In stock
The first stage Apeks TEK3 was designed for technical divers.